FIBERGLASS
Smith Fibercast offers ten standard piping systems in diameters from 1” to 24” with temperature ratings up to 275° F. Six joining systems and a wide selection of fittings are available to complete the piping systems.
Secondary containment systems, using any combination of the standard piping systems, are available to protect the environment. Smith Fibercast also can produce custom products in 1”-72” for specialty applications. Please research the products below for specifications and recommendations for your projects.
Red Thread II
Red Thread II piping systems are an economical alternative to carbon steel in mild chemical and water services. Its light weight, superior flow and ease of installation provide for lower life cycle costs.
Size Range: 2" - 24"
Inner Corrosion Barrier:
Resin rich
Pressure Ratings:
225 - 450 psig |
|
Size Range: 2 " - 16"
Pressure Ratings:
Up to 450 psig
FM approved for underground fire protection systems. |
|
Size Range: 8" - 24"
Inner Corrosion Barrier:
Resin rich
Pressure Ratings:
Up to 450 psig |
|
Construction: Filament wound with amine cured epoxy resins and fiberglass roving
Temperature Range: Up to 210°F/100°C
Joint Types: T.A.B.™ (Threaded and Bonded) or Bell and Spigot
Chemical Service: Saltwater, CO2, crude oil, natural gas, light chemical: salts, solvents and pH 2-13 solutions
PDFs available for viewing:
|
Green Thread
Green Thread pipe and fittings are an excellent choice for applications such as dilute acid and caustic applications.
Size Range: 1" - 24"
Inner Corrosion Barrier: 30 mils
Pressure Ratings: 225 - 450 psig |
|
|
Size Range: 8" - 24"
Inner Corrosion Barrier: 30 mils
Pressure Ratings: Up to 450 psig |
|
Construction: Filament wound with amine cured epoxy resins and fiberglass roving
Temperature Range: Up to 225°F/107°C
Joint Types: Bell and Spigot
Chemical Service: Dilute acids, caustics and hot brine
PDFs available for viewing:
Centricast RB
Centrifugally cast RB has been used in hot steel pickling solutions installations for over 20 years. Its unique manufacturing process makes it tough and easy to install.
Size Range: 1" - 14"
Inner Corrosion Barrier: 100 mil liner
Pressure Ratings: 150 psig / 10 bar
(higher pressure ratings in smaller sizes) |
|
|
Size Range: 1½" - 14"
Inner Corrosion Barrier: 50 mil liner
Pressure Ratings: 150 psig / 10 bar
(higher pressure ratings in smaller sizes) |
|
Construction: Centrifugally cast with aromatic amine cured epoxy resins and high strength glass fabric
Temperature Range: Up to 250°F/ 121°C
Joint Types: Straight Socket or Flanged
Chemical Service: Chemical process solutions, hot caustics, solvents, acids, salts and corrosive combinations
PDFs available for viewing:
|
Centrifugally cast RB has been used in hot steel pickling solutions installations for over 20 years. Its unique manufacturing process makes it tough and easy to install.
Size Range: 1" - 14"
Inner Corrosion Barrier: 100 mil liner
Pressure Ratings: 150 psig / 10 bar
(higher pressure ratings in smaller sizes) |
|
Size Range: 1½" - 14"
Inner Corrosion Barrier: 50 mil liner
Pressure Ratings: 150 psig / 10 bar
(higher pressure ratings in smaller sizes) |
Construction: Centrifugally cast with aromatic amine cured epoxy resins and high strength glass fabric
Temperature Range: Up to 250°F/ 121°C
Joint Types: Straight Socket or Flanged
Chemical Service: Chemical process solutions, hot caustics, solvents, acids, salts and corrosive combinations
PDFs available for viewing:
|
Smith Fibercast offers a clam shell style secondary containment system for hazardous applications. This system is easy to install and because of its unique design can be sized for single reduction, i.e., 10" primary in 12" secondary.
The flexible nature of this system allows any of the standard Smith Fibercast products to be contained.
All primary pipe carries its full pressure rating; the secondary containment can handle up to 50 psi.
Clam Shell PDFs available for viewing:
|
Chem Thread is a premium vinyl ester piping system designed to handle strong mineral acids and bleaching solutions.
Size Range: 1½" - 12"
Inner Corrosion Barrier: 75-100 mil liner
Pressure Ratings: 150 psig/ 10 bar |
|
Construction: Filament wound with premium vinyl ester resins and fiberglass roving
Temperature Range: Up to 225°F/ 107°C
Joint Types: Socket with plain end or Flanged
Chemical Service: Chemical process solutions, strong mineral acids, bleaching solutions, corrosive combinations
|
Z-Core has been used successfully in 98% sulfuric acid and aggressive pharmaceutical waste stream applications for over 10 years.
Size Range: 1" - 8"
Inner Corrosion Barrier: 100 mil
Pressure Ratings: 150 psig/ 10 bar |
|
Construction: Centrifugally cast from a premium epoxy resin with proprietary curing agents
Temperature Range: Up to 275°F/ 135°C
Joint Types: Straight Socket or Flanged
Chemical Service: Aggressive solvents--methylene chloride and acetone; corrosives such as 98% sulfuric acid
|
F-Chem is Smith Fibercast’s custom manufactured line of pipe and fittings. The pipe and fittings are designed specifically for the customer’s application.
Size Range: 1" - 72"
Inner Corrosion Barrier: 20-250 mil
(based on specification and application)
Pressure Ratings: 150 psig/ 10 bar |
|
Construction: Filament wound with epoxy, vinyl ester or polyester resins and fiberglass roving
Temperature Range: Up to 250°F/ 121°C
Joint Types: Bell and Spigot, O-ring, Flanged or Butt & Wrap
Chemical Service: Water, brine, caustics, petroleum products, acids and many chemical waste streams
|
TUBING
PVC, PP, HDPE, PVDF, Teflon
Saint Gobain
Compression Fittings
Parker
Insert Fittings
TANKS
http://www.polyprocessing.com/pdf/literature/Catalog/Table_of_Contents.pdf
Augusta Fiberglass has the experience and capabilities to fabricate FRP tanks for any application. Our tanks are constructed to meet or exceed ASTM D 3299 for filament winding, ASTM D 4097/PS15-69 for contact molding, or AMSE RTP-1.
|
RTP-1 Stamped Vessels
Augusta Fiberglass is an accredited RTP-1 fabricator capable of producing code vessels by hand lay-up, spray-up, and filament winding methods. |
|
|
Equipment
- Full line of Mandrels
- Shop Filament Winders
- Mobile Filament Winders
Types of Tanks
- Vertical
- Horizontal
- Insulated
- Rectangular
- Field Erected
- Dual Laminate
|
Tank Accessories
- Nozzles
- Vents and Dip Pipes
- Manways
- Protective Coatings
- Heating Units
- Insulation
- Baffles
- Saddles for horizontal tanks
- Agitator Supports
- Ladders and Platforms
- Level Gauges
- Lifting and hold-down lugs
- Support Stands
|
|
|
|
